glamoxyn

Start with the programmes, not the room

Before anyone draws a floor plan, write down what the studio will actually make. A daily news bulletin, a weekly talk programme and a quarterly special place very different demands on a room, and a layout that suits one often frustrates another. List the formats, how many of them will run in a typical week, and which one is the hardest to produce. That hardest format usually decides the floor area, the ceiling height and the number of camera positions you need.

It also helps to record how long a turnaround between programmes really takes today. If the crew needs forty minutes to reset between recordings in the current space, that figure tells us more about the next design than any catalogue of equipment. Bring recent running orders and, if you have them, a few minutes of footage showing how people move around the set.

  • Formats and how often each is recorded
  • The most demanding programme in the schedule
  • Current reset time between recordings
  • Typical number of guests and presenters on set

Walk the space with the people who work in it

A plan agreed only by managers tends to meet resistance on the first day of use. Arrange a walk of the actual room, or the actual shortlisted room, with a floor manager, a camera operator, a sound operator and whoever rigs the lights. Ask each of them where they stand, where they trip, and which cables they step over without thinking. Small observations of this kind shape the layout more than any measured drawing.

Note the fixed constraints at the same visit: pillars, door swings, loading routes, ventilation grilles, and the position of any existing power distribution. Photograph them and measure the clear height to the lowest obstruction. A set that looks generous on paper can lose a metre of usable depth once the door to the corridor is allowed to open fully.

  • Floor manager, camera, sound and lighting views
  • Pillars, doors, grilles and power points
  • Clear ceiling height at its lowest point

Settle the cabling and signal path early

Cabling is the part of a studio nobody admires and everybody depends on. Ask how many camera positions, microphone points, monitors and talkback stations the room must serve now, and how many it might serve in three years. Leaving spare capacity in conduits and floor boxes costs little during the build and a great deal afterwards. Decide where the gallery or control position sits relative to the floor, because that decides the length and routing of most runs.

Separate power from signal wherever the room allows, and agree labelling conventions before installation starts, not after. A clear schematic that your own engineers can read without us is part of the deliverable we aim for. If it exists only in our heads, the studio has been designed but not handed over.

  • Counts for cameras, microphones, monitors, talkback
  • Spare conduit and floor box capacity
  • Gallery position and run lengths
  • Agreed labelling and a readable schematic

Think about light and sound in the same breath

Layout decisions made for one discipline quietly affect the others. A low ceiling limits lighting angles and also changes how a boom microphone can be placed. Hard, reflective set surfaces look sharp on camera and make dialogue harder to record cleanly. Before the set design is fixed, ask the lighting and sound leads to review it together and say what they would change.

We find it useful to hold a short joint session at the drawing stage with the lighting designer and the audio lead in the room. Twenty minutes of disagreement on paper is far cheaper than a week of workarounds once flats are built and rigging points are drilled. If those disciplines are being supplied by different firms, make sure someone is responsible for connecting their requirements.

  • Lighting angles against ceiling height
  • Set surfaces and their effect on dialogue
  • One person responsible for joining the disciplines

Be honest about budget, phasing and downtime

A studio does not have to be finished in one go. Decide which elements must exist on the first day of transmission and which can follow: a second set, extra camera positions, a fuller lighting grid. Phasing works well when the infrastructure, meaning conduits, power and structure, is installed once and the visible kit is added later. It works badly when early shortcuts have to be torn out to make room for the next stage.

Ask also how much downtime the programme schedule can tolerate. Some productions can move to another room for a fortnight; others cannot miss a single day. That answer shapes whether the work is done in a block, in weekends, or in sections around the schedule, and it should be stated plainly before any quotation is written.

  • Must-have items for the first day on air
  • Items that can follow in a later phase
  • Weeks of downtime the schedule can absorb
  • Who signs off each stage

Questions to put to any studio designer

Whoever you choose, ask to see how they document their work. A good designer can show you a layout, a cable schedule and a set drawing that someone else could build from. Ask who will be on site during the installation, who you can telephone afterwards, and what is written down at handover. Ask what they would leave out of your brief, because a designer who agrees to everything has not yet understood it.

Finally, ask how they treat your crew's habits. A plan built around how your team already works will be adopted quickly; one that demands a new routine for every operator will be argued with for months. The answers to these questions tell you more than a list of past projects ever will.

  • Sample layout, cable schedule and set drawing
  • Named people on site and after handover
  • What they would change or leave out of your brief

A studio is judged by how easily the crew can make programmes in it, not by how it looked on the day the drawings were approved. Work through these points with the people who will use the room, write the answers down, and the design conversation becomes shorter and calmer. If you would like us to go through the list with you, contact the studio design team and send your running orders and room measurements.