glamoxyn

The brief from Marcus

Marcus presents a weekly regional chat show recorded in a small studio on the edge of the county. When he first called us, the complaint was simple: on screen he looked tired and slightly grey, while the guest sitting a metre away looked fine. The producer had already tried raising the intensity of the front lights, and that had made things worse, with shiny foreheads and harsh shadows under the eyes.

I visited during a rehearsal day in mid autumn, when the daylight through the studio's high windows was thin and cool. I watched a full run of the show on the monitors before touching anything. The first thing I noticed was how little the set changed between camera one and camera three, yet the colour of Marcus's face shifted noticeably between them.

That told me the problem lay in the lighting plot and in how each camera was seeing it, rather than in make-up or the presenter himself. A written plan seemed the right first step, so I agreed to measure before moving a single lamp.

What the existing rig was doing

The studio had a mixed set of fixtures hung over the years: a few older tungsten units, some newer LED panels and a pair of practical lamps on the desk. Each had a slightly different colour temperature, so the presenter was effectively lit by three different whites. Cameras balanced to one of them rendered the others as green or orange tints.

There was also a single hard key light coming from high on the left. It gave Marcus deep shadows and bright highlights on the same face, which the cameras could not hold together. Raising its level only pushed the highlights further towards clipping while the shadows stayed muddy.

I made a simple sketch of the grid, noted each fixture's type, position and approximate throw, and marked which camera each one affected most. That sketch became the base of the new plot and was something the crew could read and argue with.

  • Mixed tungsten and LED fixtures with different colour temperatures
  • One hard key light placed too high and too far to one side
  • Practical lamps on the desk adding stray colour to the face

Reworking the plot around skin tones

We chose a single colour temperature for the whole studio and replaced the two oldest tungsten units with LED fixtures that matched the rest. That alone calmed most of the shifting between cameras. Owen Pritchard, our camera engineer, then matched the three cameras to that one white, so the shading started from a consistent place.

For Marcus himself, I moved the key light lower and nearer the lens axis, and softened it with a larger diffusion frame. A gentle fill from the opposite side lifted the shadows under his eyes without flattening his features. A narrow backlight separated his shoulders from the set and gave the picture some depth.

The guest seat received a mirrored but slightly dimmer arrangement, since guests usually need less help than a presenter who is on screen for the whole programme. Every change was written into the plot with fixture positions and levels, so it could be rebuilt after the rig was next struck.

Rehearsal and small corrections

On the second day we ran a full rehearsal with the crew watching their own monitors. Marcus sat at the desk and read through the opening and a mock interview while we adjusted by small amounts. A few degrees on the key's angle took the shine off his forehead; a touch less fill removed a flat look on camera two.

The vision operator pointed out that one practical lamp was still tinting the desk edge, so we swapped its bulb for a neutral one. Small remarks like this from the people who watch the picture all day are the reason I like to finish a design in rehearsal, not on paper alone.

By the end of the afternoon the three cameras agreed with each other to a degree the crew said they had not seen in that room before. Marcus looked at the playback and said he looked rested, which was fair, since nothing about him had changed but the light.

  • Key light angle trimmed to remove forehead shine
  • Fill reduced slightly on camera two
  • Neutral bulb fitted to the desk practical

Handing over something the crew can keep

Before leaving I gave the studio manager a written lighting plot with a fixture schedule, a marked floor plan and a short page on how to re-establish the key and fill positions after any change. The aim was that nobody would need to call us for routine upkeep, and that a new floor manager could follow it without guessing.

I also left a note about colour temperature: when a fixture fails, replace it with the same type, and do not mix a new colour into the rig without checking it on the monitors first. It is the most common way a good plot slowly drifts back to a poor one.

A few weeks later the producer told me the show had settled into a steady routine, and that the make-up artist had stopped adjusting for the cameras. I take that as the right measure for lighting: when people stop mentioning it, it is doing its job.

Marcus's show did not need more light, only lighting that agreed with itself and with the cameras. A single colour temperature, a softer key placed closer to the lens, and a plot written down for the crew made the difference. If your presenter looks different on each camera, start by looking at the rig as a whole before reaching for the dimmer.