glamoxyn

Start with the room, not the equipment list

When a producer asks what a studio design will cost, the honest first answer is that it depends on the room. A converted warehouse bay with a flat concrete floor and good ceiling height is a very different job from a first-floor space with low beams, a single entrance and a lift that carries only a few hundred kilos. Before anyone draws a layout, we want to know the dimensions, the access, the power available and where the noise comes from.

Equipment comes second. Clients often arrive with a shopping list of cameras, desks and monitors, but the design fee is not a percentage of that list. It pays for the thinking: where people stand, how cables travel, how the floor manager sees the presenter and how the gallery sees everything. That work takes roughly the same effort whether the kit is modest or generous.

If you can send a rough floor plan, even a sketch with measurements, photographs of the space and a note of who will work in it, the first conversation becomes far more useful and the quotation that follows is much closer to the final figure.

  • Floor area, ceiling height and any obstructions
  • Access routes for equipment and set pieces
  • Available power and where the circuits run
  • Existing noise sources such as ventilation or traffic

How we build the figure

Our studio design work is priced on the time it takes, split into stages that you can see on the written quotation. The usual stages are a site visit and brief, a first layout with set and cabling plans, a round of revisions with your crew, and a final drawing pack that an installer or your own technicians can work from. Each stage is described so you know what you are paying for before you agree.

Prices for a single-studio design project in the UK typically begin at a few thousand pounds for a small, simple room and rise as the number of cameras, the size of the set and the complexity of the cabling grow. We give an exact figure only after seeing the space, because a number quoted blind tends to be wrong in one direction or the other.

Travel from Shrewsbury is included in the quotation as a separate line where a site visit is needed, so there are no surprises on the invoice. Anything outside the agreed scope is raised with you in writing before work starts on it.

What pushes the price up

Several decisions move the cost more than any others. The first is the number of camera positions. Each added camera brings its own cable runs, its own floor space and its own relationship to the lighting, so a five-camera studio takes noticeably longer to plan than a two-camera one. The second is whether the set must change between programmes. A fixed set can be drawn once; a studio that turns over between formats needs storage, quick-change rigging and clear marks on the floor.

Live production adds pressure on timing and redundancy, which means more careful planning of signal paths and spare capacity. Acoustic treatment is another driver. A room that echoes needs either treatment or a layout that works around it, and both take design hours.

Finally, working to a tight handover date or inside an occupied building, where installers can only work at night, changes how we sequence the drawings and how much coordination is needed. None of these is unreasonable; they simply cost time, and time is what the fee reflects.

  • Number of camera positions
  • Fixed set versus a set that changes often
  • Live transmission and the redundancy it needs
  • Acoustic problems in the room
  • Restricted working hours on site

What keeps the price sensible

There are honest ways to keep a design fee down without weakening the result. Clear decisions early are the biggest. If the programme format, the number of presenters and the camera count are settled before the first layout, revisions stay short. Every change of mind after the cabling plan is drawn means redrawing it.

Letting us design around equipment you already own also helps. If you have a usable mixing desk or a set of camera heads, we plan the room to suit them rather than start from nothing. Likewise, a straightforward rectangular room with sensible access is cheaper to design than an awkward one, so it is worth considering the space before signing a lease.

Phasing the project is another option. A studio can be designed in full but built in stages, with the cabling and structural provision done first and the extra camera positions added later. The design fee stays the same, but the capital outlay is spread out and you learn how the crew uses the space before committing the rest.

What the fee does not cover

It is better to say plainly what a design fee leaves out. It does not include the purchase of equipment, the labour of installing it, or building work such as new walls, flooring or electrical supply. Those belong to suppliers and contractors, and we can help you compare their quotations, but they are separate costs and are paid to separate parties.

Nor does the design fee include on-site commissioning, crew training or a workflow review, although each of those is available as its own piece of work with its own quotation. We prefer to keep these apart so you can choose what you need and see what each part costs, rather than buying a bundle in which the pieces are hard to tell apart.

If the scope grows during the project, we write down the change, the extra time and the extra cost, and wait for your confirmation before carrying on. That rule applies to every job, large or small, and it is the simplest way to keep a budget honest.

  • Equipment purchase and installation labour
  • Building work, flooring and electrical supply
  • On-site commissioning and crew training
  • Workflow review, quoted separately

Asking for a quotation

The process is deliberately plain. You send an enquiry through the contact page with a short description of the room, the programmes you make and the crew who will use it. We reply with questions if anything is unclear, arrange a visit where one is needed, and then send a written quotation listing the stages, the time each is expected to take and the price in pounds sterling.

Once you confirm in writing, we begin, and an invoice follows that you settle by bank transfer. Cancellations and refunds are handled under our payment and refund policy, which sets out what happens at each stage.

Late autumn is a good time to start, since many studios plan their rebuilds over the quieter winter weeks and want drawings ready before the new year's schedule fills. If that is your situation, send the enquiry early enough to leave room for a visit and a round of revisions.

The cost of a broadcast studio design follows the room, the number of cameras, how often the set changes and how firmly decisions are made early. None of it is mysterious, and a written quotation should show you each stage and what it includes. Send us the dimensions, a few photographs and a description of how your crew works, and we will set out a figure you can check against your own plans before committing to anything.